Vixen is still operating as normal, in compliance with UK Government social distancing guidelines, and we would like to reassure everyone that we are open and responding to enquiries. In the unprecedented situation we all find ourselves in, our thoughts are with the families of those fighting the COVID-19 virus and with front-line health workers around the world.

Aquablast 1215 - Vapor Blasting Equipment for Larger Components

The Aquablast 1215 is the second largest of our standard wetblasting models, and is more suitable for degreasing and blasting medium sized components. The machine needs to be large enough to maneuver the largest overall component that needs blasting while taking into consideration ease of operation. The maximum turn table for this machine is typically 900mm.

How the Aquablast Works:

The water/media slurry is contained within the cabinet sump. Delivery of the slurry to the manual blast nozzle is via a glandless polyurethane pump and associated hoses located inside the machine. Compressed air is added at the blast nozzle to accelerate the slurry and provide the cleaning effect. After contact with the component the slurry then drains back into the sump creating a re-circulating system. Fine broken down media and other contaminants are fed via an overflow to a sedimentation filter located at the rear of the cabinet. The process cleans by flow not by impact, producing a 'soft' finish with the water acting as a lubricant that not only avoids media impregnation but also extends the life of the blast media.

  • Easy to install following our simple guidelines
  • Dust free vapor blast process
  • Blast & degrease using only water and no solvents
  • Vapor blasting cleans by flow of water
  • 'Soft' finish appearance on cleaned components
  • Longer blast media life
  • 100% stainless steel construction
  • Large side door for ease of access
  • Rubber lining
  • Windscreen wiper to ensure good visibility of components being cleaned
  • Tungsten Carbide nozzle
Width Depth Height
1215mm 1050mm 873mm

Trolley and turntable with external loading

Where heavy items are to be processed it is often easier to load these items external to the blast cabinet using an overhead crane or perhaps a fork lift truck. Vixen offer this facility on all the Aquablast range with standard and special load capacities where required. The turntable can be moved outside of the chamber, loaded and wheeled back in. In some cases where needed the turntables can be linked to an electric drive inside the cabinet for operator ease.

Free standing Hydro cyclone

Free standing Hydro cyclone

This item comes complete on a stainless steel frame and being very light it can easily be lifted into the cabinet. Once inside the cabinet a bucket is placed under the cyclone and the blast gun is connected to the cyclone. The operator simply depresses the foot pedal and the abrasive begins filling the bucket which enables easy emptying of the machine of abrasive.

Fixed Turntable inside blast chamber

Turntables are a very popular option. A fixed turntable inside the machine enables easy manoeuvrability of the components to be blasted. These turntables can also be electrically gear driven if required, but in most cases can be manipulated by hand with loads of up to 50kg.

Fixed blast gun holder

With small components it is often easier for the gun to be locked into a holder and the operator simply manipulates the small part in the blast stream.

Automatic media concentration monitor

Where the integrity of the abrasive is critical and the concentration must be absolutely constant it is often easier to use the media concentration monitor which enables the operator to check the abrasive mix periodically by simply pressing a button.

Wet Cyclonic media clarification

The wet cyclones are designed to automatically remove broken down abrasive and sediment from the blasting process. These are normally specified where the blasting process is critical such as aerospace applications. The benefits of the wet cyclone are that any spent abrasive is removed and the finish integrity does not deteriorate in any way as the abrasive remains consistent.

Closed Loop System

Vixen’s closed loop system allows the machine to operate without the need of a mains water supply or drain nearby. This system is a large sedimentation filter unit that filters the liquid sufficiently and uses a heavy-duty air operated diaphragm pump to recycle water for the rinse gun and window wash.

The closed loop sedimentation tank is supplied with a series of Vixen designed containers which have an overlap feature. These are Vixen’s tooling and are fitted with weirs to allow water to cascade from one container to allow fine particles of debris or broken abrasive to settle in the containers. These containers can easily be removed for cleaning individually and make maintenance of the closed loop system quick and easy.

VIXEN - UK Office Research & Development

73 Jay Avenue, Teesside Industrial Estate, Thornaby
Stockton on Tees, TS17 9LZ, United Kingdom
Tel: +44 (0)1642 769 333
Fax: +44 (0)1642 769 441

Open hrs Mon-Fri 9:00am - 5:00pm (GMT / UTC)

Aquablast 1215 - Vapor Blasting Equipment for Larger Components | Vixen Wet Blasting


The website encountered an unexpected error. Please try again later.