Aquajet - Environmentally Friendly High Pressure Washer

VIXENS AQUAJET IS AN ENVIRONMENTALLY FRIENDLY HIGH PRESSURE WASHER THAT USES WATER AND DETERGENT TO CLEAN PARTS. THE COMPACT CABINET DESIGN BRINGS HIGH PRESSURE WASHING SAFELY INTO THE WORKPLACE AND ELIMINATES THE NEED FOR HARSH SOLVENTS AND CHEMICALS BY BLASTING COMPONENTS WITH AN AQUEOUS SOLUTION AT UP TO 1000PSI.

The Aquajet uses water at a high pressure to wash components in a safe environment. After loading the parts through the large side door, the operator places their arms through the gauntlets to handle the parts during the wash cycle. The wash gun is then operated by using the foot pedal, and the parts (such as engine blocks and bearings), are intensely washed using a heated aqueous solution. The parts can then be dried using a compressed air gun.

  • Effectively washes a variety of parts
  • 100% stainless steel wash chamber
  • Large side door
  • Windscreen wiper
  • Hand pressure hand gun

DO I NEED THE MACHINE TO BE CONNECTED TO A WATER SUPPLY OR SITED NEAR A DRAIN?

The machine can be supplied with a closed loop rinse system where the water used for the wind-screen wash and rinsing after blasting is simply recycled and filtered in a sedimentation tank sited at the rear of the machine. Periodically this sedimentation tank needs emptying (usually once per week) and refilling with clean water.

I CAN’T SEE A MACHINE SUITABLE/LARGE ENOUGH FOR THE PARTS I NEED TO PROCESS, CAN YOU HELP?

Vixen offer a full custom build service. Whether your application requires small alterations to a standard machine or a full turnkey CAD drawing proposal, Vixen have a solution to your problem at a price you can afford. Contact our sales department who will be able to advise further.

Vixen offer its customers a free testing service where samples can be sent to its state-of-the art demonstration room and tested using an extensive range of blasting and degreasing machines and equipment. By doing so, Vixen can clearly establish the correct blasting and degreasing equipment for a particular application and advise the customer on which works best. As well as this, the customer can also see which abrasive or detergent is most suitable for their specific needs, and make a decision based on the results.
Vixen’s experienced sales engineers carry out all of the necessary tests, and then send the components or samples back to the customer to review and consider before the purchase of a machine.

Payment cards